Midi Joystick 3 Axis Controller. Pitch Bend/Mod and Vector modes all in one unit - Fresh Stock Dated February 2026

Description

Midi Controller 3 Axis Joystick with 1 button on joystick plus 4 rotary potentiometer controls. Micro USB 2.0 interface. Includes 3ft Micro USB 2.0 cable.
Tested and works on USB 2.0 and above Windows and Apple machines and devices. Devices must be able to supply enough power or you will need to use a powered USB hub. The hub is mostly needed for portable devices like iPads.
This is a custom made controller with a 3D printed body painted with a stone texture paint.
The electronics are built on a Sparkfun Pro Micro USB Micro 2.0 controller. When plugged in it will be seen as a SparkFun Pro Micro. It will load as a MIDI Controller. No extra drivers needed.
Custom programming lets you change from a pitch bend / modulation control to a vector control all in one joystick at the touch of a button. Normal operation in PB/Mod then push top button to control vector controls, or any other CC controls, and when the button is released the vector controls will stay in place. You can also have it programmed without PB/Mod and have 2 banks of CC controls on the joystick.
Standard Joystick operation PLUS a third twisting control. ( This is a center return joystick )
4 additional rotary potentiometer controls.
Duel mode Axes, MIDI channel and button can be custom programed before shipping.
Current program is:
Joystick Normal mode:
Pitch Bend, Modulation, pan.
Joystick alternate mode:
CC 16, 17 and 18.
4 rotary controls programed for CC 14, 15, 19 and 20.  (unassigned channels)
Button on joystick is the mode button.
MIDI channel 1
This device can be custom programmed to any combinations of controls before shipping.
These are custom made in the USA.