FCB1010 Upgrade - Firmware Update Chip Version 2.50.1E By Behringer - Fresh Stock Dated February 2026

Description

Free eBay listing template designed by dewiso.com
Version 2.50.1E by Behringer FCB-1010
product
You are searching for a reliable, user-friendly firmware replacement for your instrument or studio equipment,
Shipping
We try to keep our shipping rates as low and transparent as possible with tracking, so you are able to follow your shipment online.
Contact
Please feel free to drop us a message here, by mail or over our Facebook chat, if you have any questions, inquiries or concerns.
Fire:
Behringer
Model:
FCB1010
Including:
√ 1* Eprom
Installation:
1. Open your device
2. Locate your Eprom socket and note the notch orientation.
3. Pull up the Eprom
4. Insert the new eprom with the notch in the same direction as you noted in point 2.
Features and further details
This is firmware update 2.50.1E and is the latest official released operation system by Behringer. This operation system update/upgrade requires
one
eprom chips as revealed in photos and the chips will be labeled to help you locate the correct chip socket. For more info, please check below.
Features/improvements from 2.0 – 2.5:
Fixes bugs in FCB1010 with firmware versions 2.4X and earlier.
Improvement to the "on-board" tap tempo function
3 new sets of 100 factory presets
New pedal calibration function.
New non-latching replay function
░░░░░░▒▒▒▓▓
Why buy from MonoTanz?
▓▓
▒▒▒░░░░░░
⸎
Tested functionality before shipping.
⸎
Free technical support. [English, German and Danish]
⸎
We try to keep our shipping rates as low and transparent as possible with tracking, so you are able to follow your shipment online.
► p
umm
s
ummārum: We provide a good product with confidence, transparency and honesty, which will improve the functionality of your equipment.
░░░░░░▒▒▒▓▓
Important notes:
▓▓
▒▒▒░░░░░░
⸎
All EPROMs are properly packaged in anti-static material to ensure quality.
⸎
This is firmware on Eprom only, the device itself is not included.
⸎
Backup any data you don't want to lose before starting. Factory Reset is often required when you replace the firmware to flush-out data from the old system.
⸎
Please feel free to drop us a message here, by mail or over our Facebook chat, if you have any problems or questions.
░░░░░░▒▒▒▓▓
Disclaimer:
▓▓
▒▒▒░░░░░░
Installation of this part along with any associated risks involved in the process are the responsibility of the buyer. Be sure to back up any data and unplug the unit before installation.
dddadasdsdasd
Thank you @ Monotanz DE
Fire: Behringer Model: FCB1010   Including: √ 1* Eprom Installation: 1. Open your device 2. Locate your Eprom socket and note the notch orientation. 3. Pull up the Eprom 4. Insert the new eprom with the notch in the same direction as you noted in point 2.